TRENDnet Network Card TEW 444UB User Manual

Quick Installation Guide  
TEW-444UB  
 
1. Antes de iniciar  
Contenidos del paquete  
TEW-444UB  
CD-ROM del controlador y la  
herramienta  
Guía de instalación rápida  
Cable de extensión USB 2.0  
Requisitos del sistema  
Una unidad de CD-ROM  
PC con un puerto USB 1.1 ó 2.0 disponible  
CPU: 300 MHz o superior  
Memoria: 32MB o más  
Windows 98SE/ME/2000/XP/2003 Server  
Aplicación  
Workstation with 108Mbps  
Wireless USB 2.0 Adapter  
(TEW-444UB)  
Workstation with  
108Mbps 802.11g  
Wireless PCI Adapter  
(TEW-443PI)  
108Mbps Wireless  
Access Point  
(TEW-450APB)  
Internet  
Notebook with 108Mbps  
802.11g Wireless PC Card  
(TEW-441PC)  
Cable/DSL 4-Port  
Firewall Router  
(TW100-BRF114)  
Cable/DSL  
Modem  
1
 
Español  
2. Cómo se instala  
¡Importante! NO conecte el adaptador USB inalámbrico a su PC a menos que  
se le indique.  
1. Introduzca el CD-ROM del  
controlador y de la herramienta  
en la unidad de CD-ROM de su PC  
y luego haga clic en Install Utility  
(Instalar herramienta).  
2. Siga las instrucciones del  
InstallShield Wizard (asistente de  
InstallShield) y luego haga clic en  
Finish (Finalizar).  
2
 
Español  
Nota: El TEW-444UB es hot pluggable, puede conectarse o desconectarse con  
el PC encendido.  
3. Conecte el adaptador USB  
inalámbrico TEW-444UB al puerto  
USB de su PC.  
Nota: Windows 2003 Server/XP/2000/ME/98SE detectará e instalará de  
manera automática los controladores apropiados. Pase a la sección 3 para  
Windows 2003 Server/XP/2000/ME. Para Windows 98SE, por favor introduzca  
su CD-ROM de Windows 98SE y siga con el paso 4.  
4. Haga clic en OK.  
La instalación ha sido completada  
3
 
Español  
3. Configuración inalámbrica  
Nota: Una configuración inalámbrica requiere un Punto de Acceso 802.11g ó  
802.11b (para Modo de Infraestructura) u otro adaptador inalámbrico 802.11g  
(para un modo de red Ad-Hoc o de Usuario a Usuario).  
1. Haga doble clic en el icono  
Wireless (Inalámbrico).  
2. Haga clic en Profile Management  
(Gestión de perfil), y luego pulse  
Scan (escanear).  
3. Haga clic en el SSID apropiado, y  
después pulse Activate (Activar)  
4
 
Español  
4. Escriba un Profile Name (Nombre  
de perfil), y después pulse OK.  
5. Compruebe que hay potencia de  
señal. La configuración ha  
finalizado.  
La configuración inalámbrica ha finalizado  
Para obtener información más detallada sobre la configuración así como de las  
configuraciones avanzadas del TEW-444UB , por favor consulte la sección de  
resolución de problemas, el CD-ROM de la Guía del Usuario, o el sitio Web de  
5
 
Español  
Troubleshooting  
Q1: I inserted the Utility & Driver CD-ROM into my computer's CD-ROM Drive and the installation  
menu does not appear automatically. What should I do?  
A1: If the installation menu does not appear automatically, click Start, click Run, and type  
D:\setup.exe where "D" in "D:\setup.exe" is the letter assigned to your computer's CD-  
ROM Drive. And then click OK to start the installation.  
Q2: When I open up the utility, all the buttons are greyed out.  
A2: Verify that the device is installed properly. Right click on My Computer -> Properties. Click  
on Hardware, then Device Manager. Double click on Network Adapters. Make sure that  
802.11g Wireless Network Adapter is listed and there is no yellow question mark or exclamation  
point. Also perform a reboot on the computer.  
Q3: When I click on Scan, I can not see my SSID.  
A3: Log on to your wireless router or access point and make sure that the SSID broadcast option is  
not disabled. Make sure the wireless light on your wireless router or access point is on.  
Q4: I completed all the steps in the Quick Installation Guide, but my Wireless USB Adapter isn't  
connecting to my access point. What should I do?  
A4: First, verify that the Network Name (SSID) matches your wireless router or wireless access  
point’s SSID. Second, check your TCP/IP properties to ensure that Obtain an IP address  
automatically is selected. Third, click Profile Management -> Scan in the Wireless Client Utility to  
check and see if there are any available wireless networks listed. Third, click Profile Management  
-> Scan in the Wireless Client Utility to check and see if there are any available wireless networks  
listed.  
Q5: The utility program shows good signal strength, but I can not get onto the Internet.  
A5: First, log on to your wireless router or access point and check to see if encryption is enable. If  
encryption is enabled, go to Profile Management -> Modify -> Security. Select the proper  
Security Options, click on configure, then put in the proper encryption key. Then click Ok.  
Second, make sure to disable any firewall programs. Third, make sure that your router is properly  
configured for Internet.  
If you still encounter problems or have any questions regarding the TEW-444UB, please refer to the  
User's Guide included on the Utility CD-ROM or contact TRENDnet's Technical Support Departmen  
Certifications  
This equipment has been tested and found to comply with FCC and CE Rules.  
Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference.  
(2) This device must accept any interference received. Including interference that may cause undesired  
operation.  
Waste electrical and electronic products must not  
be disposed of with household waste. Please  
recycle where facilities exist. Check with you Local  
Authority or Retailer for recycling advice.  
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE  
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS  
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.  
6
 
TRENDnet Technical Support  
.
US Canada  
Toll Free Telephone: 1(866) 845-3673  
24/7 Tech Support  
.
.
.
.
.
Europe (Germany France Italy Spain Switzerland UK)  
Toll Free Telephone: +00800 60 76 76 67  
English/Espanol - 24/7  
Francais/Deutsch - 11am-8pm, Monday - Friday MET  
Worldwide  
Telephone: +(31) (0) 20 504 05 35  
English/Espanol - 24/7  
Francais/Deutsch - 11am-8pm, Monday - Friday MET  
Product Warranty Registration  
Please take a moment to register your product online.  
3135 Kashiwa Street  
Torrance, CA 90505  
USA  
 
Copyright ©2006. All Rights Reserved. TRENDnet.  

TDK Network Card SI 300 User Manual
Technics Portable Speaker SB CD301 User Manual
Technics Portable Speaker SB FW50 User Manual
Toastmaster Coffeemaker ME1MSB User Manual
Toshiba Laptop X870 User Manual
Transcend Information MP3 Player MP840 User Manual
Transition Networks TV Converter Box CSDTF1022 100 User Manual
Valcom Power Supply VP 4124D User Manual
Viper Automobile Electronics G4203V User Manual
Vita Mix Blender 101807 User Manual