Tektronix Yard Vacuum TM506 User Manual

TM 9-6695-244-34P  
DEPARTMENT OF THE ARMY TECHNICAL MANUAL  
DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE  
REPAIR PARTS AND SPECIAL TOOLS LIST  
FOR  
POWER MAINFRAME, TEKTRONIX MODEL TM506  
(NSN 6625-01-048-8920)  
Current as of 5 December 1979  
Headquarters, Department of the Army, Washington, DC  
4 January 1980  
REPORTING OF ERRORS  
You can help improve this publication by calling atten-  
tion to errors and by recommending improvements and  
stating your reasons for the recommendations. Your  
letter or DA Form 2028, Recommended Changes to  
Publications, should be mailed directly to Commander,  
US Army Missile Command, ATTN: DRSMI-MFM,  
Redstone Arsenal, AL 35809. A reply will be furnished  
Directly to you.  
Paragraph  
Page  
1
SECTION I. INTRODUCTION  
Scope............................................................................................................................  
.............................1  
General .........................................................................................................................2  
Explanation of columns .................................................................................................3  
Special information .......................................................................................................4  
How to locate repair parts .............................................................................................5  
Abbreviations ................................................................................................................6  
1
1
5
5
6
II. REPAIR PARTS LIST ....................................................................................................................... 9  
Functional  
Group  
Group  
title  
Model  
No.  
Part  
No.  
6691  
Power Mainframe  
TM506  
MIS30526/ITYI  
III. NATIONAL STOCK NUMBER AND PART  
NUMBER INDEX. .........................................................................................................  
11  
i
 
PG - Item procured and stocked to provide for sustained support for the life of the equipment.. It is applied to  
an item peculiar to the equipment which, because of probable discontinuance or shutdown of production  
facilities, would prove uneconomical to reproduce at a later time.  
KD - An item of a depot overhaul/repair kit and not purchased separately. Depot kit defined as a kit that  
provides items required at the time of over-haul or repair.  
KF - An item of a maintenance kit and not purchased separately. Maintenance kit defined as a kit that  
provides an item that can be replaced at organizational or intermediate levels maintenance  
KB - Item included in both a depot overhaul/repair kit and a maintenance kit.  
MO - Item to be manufactured or fabricated at organizational level.  
MF - Item to be manufactured or fabricated at the direct support maintenance level.  
MH - Item to be manufactured or fabricated at the general support maintenance level.  
MD - Item to be manufactured or fabricated at the depot maintenance level.  
AO - Item to be assembled at organizational level.  
AF - Item to be assembled at direct support maintenance level.  
AH - Item to be assembled at general support maintenance level.  
AD - Item to be assembled at depot maintenance level.  
XA - Item is not procured or stocked because the requirements for the item will result in the replacement of  
the next higher assembly.  
XB - Item is not procured or stocked. If not available through salvage, requisition.  
XC - Installation drawing, diagram, instruction sheet, field service drawing, that is identified by manufacturer's  
part number.  
XD - A support item that is not stocked. When required, item will be procured through normal supply  
channels.  
NOTE Cannibalization or salvage may be used as a source of supply for any items coded above except  
those coded XA and aircraft support items as restricted by AR 700-42.  
(2)  
(a)  
Maintenance Code. Maintenance codes are assigned to indicate the levels of maintenance  
authorized to USE and REPAIR support items. The maintenance codes are entered in the  
third and fourth positions of the Uniform SMR Code format as follows:  
The maintenance code entered in the third position will indicate the lowest maintenance level  
authorized to remove, replace, and use the support item. The maintenance code entered in  
the third position will indicate one of the following levels of maintenance:  
2
 
Code Application/Explanation  
C - Crew or operator maintenance performed within organizational maintenance.  
O - Support item is removed, replaced, used at the organizational level.  
F- Support item is removed, replaced, used at the direct support level.  
H - Support item is removed, replaced, used at the general support level.  
D - Support items that are removed replaced, used at depot, mobile depot, or specialized repair activity only.  
(b) The maintenance code enteredin the fourth position indicates whether the item is to be repaired and  
identifies the lowest maintenance level with the capability to perform complete repair (i.e., all authorized  
maintenance functions). This position will contain one of the following maintenance codes:  
Code Application/Explanation  
O - The lowest maintenance level capable of complete repair of the support item is the organizational level.  
F - The lowest maintenance level capable of complete repair of the support level.  
H - The lowest maintenance level capable of complete repair of the support item is the general support level.  
D - The lowest maintenance level capable of complete repair of the support item is the depot level.  
L - Repair restricted to (enter applicable designated specialized repair activity),  
Z - Nonreparable. No repair is authorized.  
B - No repair is authorized. The item may be reconditioned by adjusting, lubricating, etc., at the user level. No  
parts or special tools are procured for the maintenance of this item.  
(3) Recoverability Code. Reactivity codes are assigned to support items to indicate the disposition  
action on unserviceable items. The recoverability code is entered in the fifth position of the Uniform SMR  
Code format as follows:  
Recoverability Codes Definition  
Z - Nonreparable item. When unserviceable, condemn and dispose at the level indicated  
in position 3.  
O - Reparable item. When uneconomically reparable, condemn and dispose at organizational level.  
F - Reparable item. When uneconomically reparable, condemn and dispose at the direct support level.  
3
 
H. - Reparable item. When uneconomically reparable, condemn and dispose at the general support level.  
D - Reparable item. When beyond lower level repair capability, return to depot. Condemnation and disposal  
not authorized below depot level.  
L - Reparable item. Repair, condemnation, and disposal not authorized below depot/specialized repair  
activity level.  
A - Item requires special handling or condemnation procedures because of specific reasons (i.e., precious  
metal content, high dollar value, critical material or hazardous material). Refer to appropriate  
manuals/directives for specific instructions.  
c. National Stock Number (NSN). Indicates the NSN assigned to the item and which will be used for  
requisitioning.  
d. Part Number. Indicates the primary number used by the manufacturer (individual, company, firm,  
corporation, or Government activity), which controls the design and characteristics of the item by means of  
its engineering drawings, specifications, standards, and inspection requirements to identify an item or range of  
items.  
NOTE  
When a stock numbered item is requisitioned, the item received may have a different part number than the  
part being replaced.  
e. Federal Supply Code for Manufacturer (FSCM). The FSCM is a 5-digit numeric code listed in SB 708-42  
which is used to identify the manufacturer, distributor, or Government agency, etc.  
f. Description. Indicates the Federal item name and, if required, a minimum description to identify the  
item. The physical security classification of the item is indicated by the parenthetical entry (insert applicable  
physical security classification abbreviation, e.g., Phy Sec Cl (C)-Confidential, Phy Sec C1 (S)-Secret, Phy  
Sec Cl (T)-Top Secret). Items that are included in kits and sets are listed below the name of the kit or set with  
the quantity of each item in the kit or set indicated in the quantity incorporated in unit column. When the part  
to be used differs between serial numbers of the same model, the effective serial numbers are shown as the  
last line of the description. In the Special Tools List, the initial basis of issue (BOI) appears as the last line in  
the entry for each special tool, special Test, Measurement, and Diagnostic Equipment (TMDE), and other  
special support equipment. When density of equipments supported exceeds density spread indicated in the  
BOI, the total authorization is increased accordingly.  
g. Unit of Measure (U/M). Indicates the standard of the basic quantity of the listed item as used in  
performing the actual maintenance function. This measure is expressed by a two-character alphabetical  
abbreviation (e.g., ea, in, pr, etc). When the unit of measure differs from the unit of issue, the lowest unit of  
issue that will satisfy the required units of measure will be requisitioned.  
4
 
h. Quantity Incorporated in Unit. Indicates the quantity of the item used in the breakout shown on the  
illustration figure, which is prepared for functional group, subfunctional group, or an assembly. A "V"  
appearing in this column in lieu of quantity indicates that no specific quantity is applicable (e.g., shims,  
spacers, etc).  
4. Special information  
a. Repair parts for components of standards sets which can be identified as existing in the supply  
system will be requisitioned through normal supply channels from the appropriate supply commodity  
manager.  
b. Repair parts for components of standards sets which cannot be identified as to proper supply  
source will be requisitioned from USAMICOM, using routing identifier B64 and furnishing as a minimum, the  
following as exception data.  
(1) Component stock number of the individual end item to be repaired.  
(2) Component manufacturer's equipment model number and serial number.  
(3) The equipment manufacturer's stock number as listed in the appropriate manual for the  
desired repair part.  
(4) The repair part reference designation, circuit reference, circuit symbol schematic  
designation, or reference number as listed in the manufacturer's manual.  
(5) The technical specification of the repair part as contained in the appropriate  
manufacturer's manual.  
(6) The title and date of the manufacturer's manual from which the information in paragraphs  
a, b(3), (4), and (5) above was taken.  
NOTE  
Repair parts should not be requisitioned for plug-in boards identified in the plug-in boards identified in the  
plug-in board exchange program, except by the depot designated to perform the repair. Repair of  
calibration set components, with plug-in board assemblies or subassemblies designated as program  
exchange replacements with a recoverability code of L, will be accomplished by replacing the plug-in board.  
c. The plug-in board exchange program functions are as follows:  
(1) Requisitioning instructions for initial issue plug-in boards will be provided since new  
instrument boards are included in the program.  
(2) As a plug-in board covered by the program fails, a replacement will be requisitioned.  
Requisitions will be submitted to Commander, US Army Missile Command, B64, Redstone Arsenal,  
AL 35809.  
(3) Simultaneously with c(2) above, the defective board being replaced will be shipped by  
certified mail, return receipt requested, to the following address:  
Transportation Officer  
Anniston Army Depot  
M/F Field Service Stock  
Anniston, AL 36201  
When requisitioning a replacement board, the turn-in document number of the replaced board shall be cited  
on requisition.  
5. How to Locate Repair Parts  
a. When NSN or reference number is unknown:  
(1) First. Using the table of contents, determine the assembly (functional group) within  
which the repair part belongs.  
5
 
(2) Second. Using the repair parts listing, find the functional group to which the repair part  
belongs and locate the item by description.  
b. When NSN or reference is known:  
(1) First. Using the index of NSN's and reference numbers, find the pertinent NSN or  
reference number. This index is in ascending NSN cross-referenced to the illustration figure number and item  
number.  
(2) Second. Using the repair parts listing, find the figure and item number, and locate the figure  
and item number in the repair parts list.  
6. Abbreviations.The abbreviations listed below may appear in this RPSTL:  
AC ------------  
ACC --------  
alternating current  
accordance  
ELEC---------  
EQUIPM------- equipment  
electrical  
ACCUR ------ accuracy  
F--------------- Fahrenheit  
AL-----------  
aluminum  
FED----------- Federal  
FIN------------- finish  
AMP ----------  
ampere  
ASSY --------  
ASTM --------  
assembly  
American Standard  
or Testing Materiel  
FLG ----------- flange  
ATTEN -------  
AWG ----------  
attenuation  
FREQ--------- frequency  
American Wire Gage  
FSCM---------- Federal supply code  
for manufacturer  
BAN-----------  
banana  
FT-------------- foot  
BLK------------  
BR-------------  
C--------------  
black  
GC-----------  
GEN ---------- generator  
GHZ ---------- gigahertz  
gigacycles  
brass  
centigrade, calibration, cycles second  
CAL ------------ calibrate  
CAP---------  
CD -----------  
CER ----------- ceramic  
capacitance  
code  
GPM ---------- gallons per minute  
GPM ---------- gallons per minute  
GRAD -------- graduation  
COAX -------  
coaxial  
H -------------  
high  
COMP---------  
composition  
HD------------  
head  
CONDM--------- conductor  
HYDR -------- hydraulic  
HZ----------- hertz  
ID ------------- inside diameter  
IN--------- inch  
CONN ---------- connector  
CONS---------  
CONT--------  
consisting  
continual  
COP ----------  
copper  
INCL - ---------- inclusive  
COR ----------  
corrosion  
K -------------  
thousand (prefix)  
CPS ----------  
CU -------------  
cycles per second  
cubic  
KC-----------  
KG-----------  
kilocycles  
kilograms  
CUR ----------  
CYL ----------  
DB ------------- decibel  
DBL----------  
DC ------------  
DEG ------------ degree  
current  
cylinder  
KHZ ----------  
kilohertz  
KMHZ -------- thousand megahertz  
KV------------ kilovolts  
LAB ----------- laboratory  
LB----------  
LG------------  
LT----------  
double  
direct current  
pounds  
length  
light  
DET ----------  
detector  
DIA -----------  
diameter  
DIM ------------- dimension  
DIV------------ division  
DPDT --------- double pole double throw  
DPL------------ deployment  
6
 
M ---------------thousand  
RPM------------ revolutions per  
minute  
MA ---------- milliampere  
MAX ----------maximum  
MC ---------- megacycles  
MFD --------- millifarads  
MFR ----------manufacturer  
MG ---------- milligrams  
MHZ ----------megahertz  
MIN ----------minimum, minutes  
ML ---------- milliliters  
MM ---------- millimeters  
MOD ----------modified  
MSEC ---------milliseconds  
MTL ----------material  
S -------------  
single  
SEC---------- seconds  
SECT ---------- section  
SERR-------- serrated  
SHK ---------- shank  
SNG ---------- single  
SPEC ---------- specification  
SPL ---------- special  
SQ -------------- square  
STD------------ standard  
STGT---------- straight  
SW ----------- switch  
SWR ---------- standing  
wave ratio  
MV ---------- millivolts  
MW---------- milliwatts  
NBS---------- National Bureau Standards  
NEG --------- negative  
NO-------------number  
SYS ---------- system  
TEL ---------- telescopic  
TERM --------- terminal  
THD---------- thread  
THERM ------- thermometer  
THK ---------- thick  
NOM--------- nominal  
NPT --------- National Pipe Thread  
NSN --------- National stock number  
OA ------------overall  
TSTR --------- tester  
U -----------  
unit  
UF ----------  
microfarads  
OD ----------- outside diameter  
UHF------  
ultra high  
frequency  
OPER --------operating  
OZ ----------- ounce  
V ------------ volts  
VAC ---------- volts alternating  
current, vacuum  
PCS --------- pieces  
PCT ----------percent  
PF ------------picofarads  
VDC ---------- volts direct current  
VHF ---------- very high frequency  
VSWR --------- voltage standing  
wave ratio  
PK ----------- peck  
PLTD ------- plated  
W ------------ watts, with, width  
WT ---------- weight  
PN ----------- part number  
POS----------positive  
PP ---------- peak-to-peak  
PSI ---------- pounds per square inch  
PWR--------- power  
REF---------- reference  
REP--------- repetition  
REQ -------- required  
REQMTS----requirements  
RES---------- resistance  
RF ----------- radio frequency  
RG ---------- range  
RH ----------- right hand  
RL------------ reel  
RM -----------rack mounted  
RMS ---------root mean square  
ROT ----------rotating  
7 (8 BLANK)  
 
SECTION II. REPAIR PART LIST  
(2)  
(7)  
(1)  
(5)  
(4)  
(8)  
QTY  
INC  
IN  
(6)  
(3)  
ILLUSTRATION  
DESCRIPTION  
NATIONAL  
STOCK  
NUMBER  
(b)  
ITEM  
NO.  
(a)  
FIG  
NO.  
SMR  
CODE  
PART  
U/M  
FSCM  
UNIT  
USABLE ON CODE  
NUMBER  
GROUP 6691  
MAINFRAME, POWER MOD  
TM506  
MSI30526/1TY1  
80009  
18876  
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
10  
20  
30  
40  
50  
60  
70  
80  
90  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
5340-00-062-5431 348 0191-00  
6225-01-018-2369 161-0033-04  
5910-00-546-3271 283-0024-00  
5910-00-577-1346 DA49-001CB  
5910-01-022-3075 290-0637-00  
80009  
80009  
80009  
71590  
80009  
56286  
80009  
80009  
80009  
80009  
80009  
80009  
80009  
80009  
82877  
82877  
82877  
80009  
80009  
80009  
18876  
71400  
71400  
10001  
80009  
82877  
80009  
80009  
80009  
80009  
80009  
80009  
80009  
80009  
UMPER.PLASTIC  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
1
1
1
16  
4
3
1
1
1
16  
16  
6
6
6
1
1
1
1
2
1
1
2
1
1
1
1
1
I
4
2
10  
1
6
CABLE ASSEMBLY POWER  
CAPACITOR,FIXFED  
CAPACITOR,FIXEC,CER  
CAPACITOR.FIXEC,ELE  
CAPACITOR,FIXEC.ELE  
CIRCUIT CARD ASSY  
CIRCUIT CARD ASSY  
CIRCUIT CARD ASSY  
CLIP.,ELECTRICL  
CONTACT,ELECTRICAL  
CCNTACT.ELECTRICAL  
CONNECTOR.RECEPTACEL  
CCNNECTOR, RECEPTACLE  
FAN,TUBEAXIAL  
FAN,TUBEAXIAL  
FAN,VENTILATING  
FILTER MEDIA,AIR  
FUSE,CARTRIDGE  
FUSE,CARTRIDGE  
FUSE,CARTRIDGE  
FUSE,CAPTRIDGE.  
FUSE,CARTRIDGE  
FUSE,ELECTRICAL  
FUSEHOLDER, EXTRACTOR  
GUARO,MECHANICAL DRIVE  
GUIDE  
GUIDE  
INSULATOR,BUSFING  
INSULATOR,BUSING  
INSULATORWASER  
INSULATOR,PLATE.  
KEY,POLAPIZING,ELEC  
NUT, PLAIN,HEXAGON  
5910-00-467-1548  
6695-01-084-9120  
6695-01-084-9121  
6695-01-084-9122  
5999-00-465-9987  
5999-00-551-9433  
5999-00-396-6331  
5935-00-599-8548  
5935-00-599-8548  
4140-00-726-9755  
80D10444  
70-3303-00  
670-3984-00  
670-3834-00  
344-0154-00  
131-0608-00  
131-0707-00  
131-1078-00  
131-1078-00  
WR2A1  
100  
110  
120  
130  
140  
150  
160  
170  
180  
190  
200  
210  
220  
230  
240  
260  
270  
280  
290  
300  
310  
320  
330  
340  
350  
4140-00-726-9755 WR2A1  
4140-00-113-0989  
4130-00-281-4034  
5920-00-807-8659  
5920-00-082-7561  
5920-00-284-7466  
5920-00-284-7079  
5920-00-056-6620  
NU2A1  
378-0029-00  
159-0023-00  
159-0027-00  
10328857  
AGC2-1/2  
AGC7-1-2  
5920-00-728-6767 59A5A260-3  
5920-01-005-9621 382-0362-00  
4140-30-227-8228 20132-2  
5340-01-056-2929  
5340-01-056-2930  
251-0286-04  
351-0379-01  
166-0434-00  
PAPFZZ 5970-00-571-8317  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
5970000-451-0436 210-0935-00  
5970-01-024-4788 342-0136-00  
5970-00-491-0108  
5935-00-488-3412  
5310-00-00h-8205  
386-0978-00  
214-1593-02  
210-0458-00  
4
9
 
(1)  
(7)  
(8)  
QTY  
INC  
IN  
(6)  
(2)  
(3)  
(4)  
(5)  
ILLUSTRATION  
(a)  
FIG  
NO.  
(b)  
ITEM  
NO.  
DESCRIPTION  
NATIONAL  
STOCK  
NUMBER  
SMR  
CODE  
PART  
NUMBER  
U/M  
UNIT  
USABLE ON CODE  
FSCM  
1
360  
370  
380  
390  
400  
410  
420  
430  
440  
450  
460  
470  
480  
490  
500  
510  
520  
530  
540  
540  
560  
570  
580  
590  
600  
610  
620  
630  
650  
660  
670  
680  
690  
700  
710  
720  
730  
740  
750  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
PAFZZ  
5310-00-655-6534  
5310-00-845-7736 NAS671B6  
40T10  
52983  
80205  
NUT,PLAIN ASSEMBLED  
NUT,PLAIN,.HEXAGCN  
511-041800-00 78189 NUT,PLAIN,ASSEMBLED  
EA  
EA  
EA  
EA  
EA  
E A  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
4
2
2
7
1
3
2
12  
I
1
32  
2
3
1
4
2
1
8
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
5310-00-836-3520  
5310-00-841-8106  
5905-01-014-4756  
5905-00-138-4927  
5905-30-11C-0992  
5305-30-20e-2733  
5305-00-316-9526  
5305-00-492-2145  
53C5-00-625-9546  
5305-00-989-3116  
5305-01-006-8957  
5305-00-418-8251  
210-0457-00  
308-0734-00  
RCR42G102JS  
RCR32G511JS  
SC10094  
212-0082-00  
211-0101-00  
212-0040-00  
MS35206-213  
211-0012-00  
211-0097-00  
80009  
80009  
81349  
81349  
80249  
80009  
80009  
80009  
96906  
83385  
80009  
NUT,,PLAIN,HEXAGON  
RESISTOR,FIXED,FILM  
RESISTOR, FIXED,COMP  
RFSISTORFIXEO,COMP  
SCREW,ASSEMBLED WASHER  
SCEW  
SCREW,MACHINE  
SCREW,,MACHINE  
SCREW,MACHINE  
SCREW,MACHINE  
SCREW,MACHIINE  
SCPEW.CAP.HEXAGON HEAD  
SCREWW,MACHINE  
SCREW,MACHINE  
SCREW,MACHINE  
SCREW,MACHINE  
5305-01-077-0167 212-0511-00  
5305-00-40e-0129  
53C5-30-63e-0502  
80009  
8186861  
MS35214-28  
18876  
96906  
80009  
96906  
53C5-00-005-0795 211-0507-00  
5305-00-763-7822  
5305-00-889-3000  
5305-00-841-8060  
5961-00-92C-4975  
5961-00-131-1197  
MS51959-14  
MS35206-230  
211-0105-00  
IN4721 80131  
152-0274-30  
80009  
SCREW,MACHINE  
SEMICONDUCTOR DEVICE  
SEMICONDUCTOR DEVICE  
SW!TCH,ELECTRICAL  
SWITCH.PUSH-PULL  
SWITCH,PUSH-ULL  
SWITCH,E,LECTRIC  
TRANSISTOR  
TRANSISTOR  
TRANSISTOR  
TERMINAL,LUG  
TERMINAL,LUG  
TERMINAL BOARD  
TERMINAL,LUG  
WASHER,FLAT  
WASHER,FLAT  
WA5HER,FLAT  
EA  
EA  
EA  
EA  
EA  
EA  
.EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
EA  
1I  
4
4
2
1
1
2
5
1
1
1
1
1
1
1
6
1
4
2
80009  
81439  
91929  
91929  
81439  
80009  
04713  
80009  
96906  
05624  
71785  
96906  
80009  
80009  
80009  
80009  
80009  
15030-00-829 3251 SE1156363  
5930-00-344-2011  
5030-00-344-2011  
5930-00-829-3251  
5961-00-370-1271  
5961-01-033-3079  
5'61-00-724-2131  
5940-00-827-2653  
5943-00-156-7344  
5940-00-271-4622  
5940-00-682-2477  
5310-00-192-0631  
5310-01-031-7134  
5310-C0-113-1494  
5310-01-064-7816  
5310-03-418-2621  
2DM301  
2DM301  
SE11S6363  
151-0373-00  
MJ2955  
151-0140-00  
MS77068-2  
FRYE20  
1510  
MS77068-1  
210-0873-00  
213-0804-03  
210-0851-00  
210-0055-00  
210-0802-00  
WASHER,LOC  
WASHER,LOCK  
10  
 
FIGURE  
NO.  
ITEM  
NO.  
FIGURE  
NO.  
ITEM  
STOCK NUMBER  
STOCK NUMBER NO.  
5305-00-0C5-C795  
5310-00-006-8205  
5920-00-056-6620  
5340-00-062-5431  
5920-00-082-7561  
5905-00-110-C992  
4140-00-113-C989  
5310-00-113-1494  
5961-00-131-1197  
5905-00-138-4927  
5940-00-156-7344  
5310-00-192-0631  
5305-00-206-2733  
4140-00-227-8228  
5940-00-271-4622  
4130-00-281-4034  
5920-00-284-7C79  
5920-00-284-7466  
5305-00-316- 526  
5930-00-344-2011  
5930-00-344-2011  
5961-00-370-1271  
5999-00-396-t331  
5305-00-408-0129  
5310-00-418e-2621  
5305-00-418-8251  
5970-00-451-0436  
5999-00-4t5-S987  
5910-00-467-1548  
5935-00-488-3412  
5970-00-491-0108  
5305-00-492-2145  
5910-00-546-3271  
5999-00-551-9433  
5970-00-571-8317  
5910-00-577-1346  
5935-00-599-8548  
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
I
1
1
1
1
1
1
1
1
1
1
1
I
530  
350  
230  
10  
5935-00-599-8548  
5305-00-625-9546  
5305-00-638-0502  
5310-00-655-6534  
5940-00-682-2477  
5961-00-724-2138  
4140-03-726-9755  
1
1
1
1
1
1
1
140  
460  
523  
360  
703  
660  
150  
160  
240  
540  
190  
670  
590  
620  
380  
560  
390  
370  
550  
470  
570  
260  
480  
400  
20  
200  
420  
170  
73C  
580  
410  
680  
710  
430  
27C  
690  
180  
220  
210  
440  
60C  
610  
630  
120  
510  
750  
490  
310  
100  
60  
414C-00-726-9755 1  
5920-00-728-6767  
5305-00-763-7822  
1
1
592C-00-807-8659 1  
5940-00-827-2653  
1
593C-30-829-3251 1  
5930-30-829-3251  
5310-00-836-3520  
1
1
53C5-00-841-806C 1  
5313-00-841-8106  
5310-00-845-7736  
5305-30-889-3000  
5305-00-889-3116  
5961-00-929-4975  
592}-01-005-9621  
1
1
1
1
1
1
53305-31-306-8957 1  
5905-01-314-4756  
6625-01-018-2369  
5910-01-022-3075  
5970-01-024-4788  
5310-01-331-7134  
5961-01-033-3079  
5340-31-056-2929  
5340-01-056-2930  
5310-01-364-7816  
5305-01-077-0167  
6695-31-084-9120  
6695-01-084-0121  
6695-01-084-9122  
1
1
1
1
1
1
1
1
1
1
1
1
1
53  
320  
720  
650  
280  
290  
740  
500  
73  
340  
330  
450  
30  
110  
300  
40  
1
1
1
83  
90  
13C  
FIG.  
NO.  
ITEM  
PART  
FIG.  
ITEM  
FSCM NO.  
NUMBERFSCM  
NO.  
NO.  
AGC2-1/2  
AGC7-1-2  
71400  
71400  
71590  
05624  
04713  
96906  
96906  
96906  
96906  
96906  
96906  
82877  
80205  
81349  
81349  
80249  
81439  
81439  
82877  
82877  
80131  
18876  
80009  
80009  
80009  
80009  
80009  
80009  
71785  
80009  
80009  
80009  
80009  
80009  
91929  
91929  
82877  
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
220  
230  
40  
210-0055-00  
210-0457-00  
80009  
80000  
80009  
80009  
80009  
80009  
80009  
80009  
83385  
80009  
80009  
80009  
80009  
80009  
80009  
80009  
80009  
80009  
80009  
80009  
80309  
80009  
80009  
80009  
80009  
80039  
80009  
80009  
52983  
78189  
10031  
80009  
80009  
80009  
56289  
18876  
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
740  
390  
350  
750  
720  
730  
710  
310  
480  
490  
450  
560  
533  
460  
440  
503  
340  
30  
0A149-001CB  
FRYE20  
210-0458-00  
210-0802-00  
210-0804-00  
210-0851-00  
210-0873-CO  
210-0935-00  
211-0012-00  
211-0097-00  
211-0101-03  
211-0105-00  
211-0507-30  
212-004-00  
212-0082-00  
212-0511-00  
214-1593-02  
283-0024-00  
290-0637-00  
308-0704-03  
342-0136-30  
344-0154-00  
348-0191-00  
351-028604  
351-0379-01  
352-0362-00  
378-0029-30  
386-0978-00  
40710  
680  
650  
470  
550  
520  
540  
700  
670  
170  
370  
420  
410  
430  
590  
620  
150  
160  
570  
210  
110  
120  
130  
140  
660  
630  
690  
580  
190  
200  
20  
MJ2955  
MS35206-213  
MS35206-230  
MS35214-28  
MS51959-14  
MS77068-1  
M577068-2  
MU2A1  
NAS67186  
RCR325GS11JS  
RCR42G1O2JS  
SC10094  
SE11S6363  
SEll156363  
WR2A1  
50  
W2AI  
400  
320  
100  
13  
1N4721  
10328857  
131-0608-00  
131-0707-C0  
131-1078-00  
131-1078-00  
151-0140-00  
151-0373-00  
1510  
283  
293  
263  
180  
330  
360  
380  
240  
70  
152-0274-00  
159-0023-00  
159-0027-C0  
161-0033-04  
166-0434-00  
20M301  
511-041800-30  
59A5A260-3  
670-3303-00  
670-3834-00  
670-3984-00  
68010444  
90  
300  
600  
610  
270  
83  
60  
20M301  
20132-2  
8186861  
510  
11  
 
By Order of the Secretary of the Army:  
E. C. MEYER  
General, United States  
Army  
Official:  
Chief of Staff  
J. C. PENNINGTON  
Major General, United States Army  
The AdjutantGeneral  
Distribution:  
To be distributed in accordance with DA Form 12-34A, requirements for Calibration Procedures  
Publications  
*U.S. GOVERNMENT PRINTING OFFICE: 1980-640217/311  
 

Technicolor Thomson CRT Television 14MG10F User Manual
Technicolor Thomson Stereo System CS140 User Manual
Telex Portable Speaker EVM 15L User Manual
Texas Instruments Network Card TMS320DM36X User Manual
Toastmaster Convection Oven RHTCOB328B User Manual
Toastmaster Toaster TC13A3663 User Manual
TP Link Home Security System TL SC3230 User Manual
Trek Bicycle 11i User Manual
Tripp Lite Power Supply APSINT Series User Manual
Uniden Photo Scanner BC355N User Manual